Na'urar dizal ta wayar hannu
Rotary Drilling Rigamfani gabatarwa
1. Yana ɗaukar ƙwaƙƙwaran ƙaƙƙarfan ƙaƙƙarfan ƙaƙƙarfan ƙaƙƙarfan ƙaƙƙarfan ƙaƙƙarfan ƙaƙƙarfan ƙaya da babban diamita mai ɗaukar nauyi don samar da kwanciyar hankali na ban mamaki da dacewar sufuri.
2. Yana ɗaukar injin guangxi cummins mai sarrafa injin turbo mai caji don samar da ƙarfi mai ƙarfi da daidaituwa tare da ƙa'idodin fitarwa na Euro III.
3. Tare da na'ura mai aiki da karfin ruwa matsa lamba tsarin soma kofa ikon iko da korau kwarara iko, da tsarin samu high dace da mafi girma makamashi kiyayewa.
4. Yin amfani da igiya guda ɗaya, da kyau warware matsalar igiyar igiya ta ƙarfe, inganta rayuwar igiya;Kuma an saita na'urar gano zurfin ganowa a cikin babban iska, igiya guda ɗaya don yin zurfin bincike mafi inganci.
5. Dukan ƙirar injin ɗin sun cika buƙatun umarnin CE, garantin aminci, aminci mai aminci.
6. Daidaitaccen tsarin lubrication na tsakiya, kiyayewa ya fi dacewa.
7. Yawancin gyare-gyaren sandar hakowa tare da ƙayyadaddun ƙayyadaddun ƙayyadaddun suna samuwa don ingantaccen ginawa akan nau'i daban-daban.
8. Maɓallin maɓalli na naúrar da aka cire zai iya samar da sauƙi mai sauƙi da sauyawa.
| S/N | Bayani | Naúrar | ƙimar siga | |
| 1 | Max.diamita hakowa | mm | Æ1500 | |
| 2 | Max.zurfin hakowa | m | 56 | |
| 3 | Iyakar luffing da aka yarda (daga tsakiyar sandar rawar soja zuwa cibiyar kisa) | mm | 3250～3650 | |
| 4 | Girman na'urar hakowa a yanayin aiki (L × W × H) | mm | 7550×4200×19040 | |
| 5 | Girman na'urar hakowa a yanayin sufuri (L × W × H) | mm | 13150×2960×3140 | |
| 6 | Nauyin naúrar gabaɗaya (daidaitaccen tsari, ban da kayan aikin hakowa) | t | 49 | |
| 7 | Injin | Samfura | Farashin QSB7 | |
| Ƙimar ƙarfi/gudu | kW | 150/2050r/min | ||
| 8 | Max.aiki matsa lamba na na'ura mai aiki da karfin ruwa tsarin | MPa | 35 | |
| 9 | Rotary drive | Max.karfin juyi | kN •m | 150 |
| Gudun juyawa | r/min | 7～33 | ||
| 10 | Ciwon Silinda | Max.Karfin turawa | kN | 120 |
| Max.Ƙarfin ja | kN | 160 | ||
| Max. bugun jini | mm | 3500 | ||
| 11 | Babban nasara | Ƙarfin jan hankali | kN | 160 |
| Max.gudun igiya guda ɗaya | m/min | 72 | ||
| Diamita na igiyar waya ta karfe | mm | 26 | ||
| 12 | Winch mai taimako | Ƙarfin jan hankali | kN | 50 |
| Max.gudun igiya guda ɗaya | m/min | 60 | ||
| Diamita na igiyar waya ta karfe | mm | 16 | ||
| 13 | Hakowa mast | Ƙaunar hagu/dama na mast | ° | 3/3 |
| Matsayin gaba/baya na mast | ° | 5 | ||
| 14 | Rotary tebur kwana slewing | ° | 360 | |
| 15 | Tafiya | Max.gudun tafiya na gaba ɗaya naúrar | km/h | 2.5 |
| Max.hawa tudu na gaba ɗaya naúrar | % | 40 | ||
| 16 | Crowler | Nisa na farantin rarrafe | mm | 700 |
| Nisa na waje na mai rarrafe (min.-max.) | mm | 2960～4200 | ||
| Nisa ta tsakiya tsakanin ƙafafu masu tsayi biyu na rarrafe | mm | 4310 | ||
| Matsakaicin matsa lamba na ƙasa | kPa | 83 | ||
